Sunday 16 June 2019

Traffic Signal Pie: The Long Wait

So this week, I was inspired by Brian Deegan to go and time how long it took to get a green man/ cycle at a 2-stage toucan crossing I use twice a day.

To be honest, it wasn't quite as bad as it might have been with a 45 second wait for the first half and a 25 second wait for the second half;


For those who are interested, the location is here. The interesting thing about the crossing is it was one of the things that enabled me to start cycling to work in 2011 because it just used to be a pair of dropped kerbs on each side;


The provision of a signalised crossing along with shared-path widening and the adding of a 2-stage toucan at another junction all worked to make my trip easier. It's all far from perfect, but it makes the journey possible. I digress.

The problem with my regular crossing is that the length of time it takes to get a green leads to a couple of scenarios because of the traffic flow on the road it crosses. On one side of the crossing, it's a bit harder to see the gap in traffic because of the speed of vehicles leaving the adjacent roundabout, but there is never slow moving traffic. 

On the other side, it's either absolutely deserted and so there is no need to wait for a green and sometimes it's pretty much stationary which leads to the quandary of crossing between two lines of traffic or push and wait for a green. Driver behaviour is variable with some leaving the crossing clear and some blocking it and with the risk of motorcyclists filtering between the two lanes. I often press the button and wait for a green so I am sure because it is often the case that one lane is moving and the other is not which means (depending where I am crossing from) that I am masked from drivers in the moving lane.

So, am I just a whinger? The journey usually takes a sedate 25 minutes and if it takes a couple of minutes to cross, so what? Am I more important than the drivers I am stopping to cross the road? The thing about traffic signals is that they are not a safety device, they are a traffic (in the widest sense) management tool. They are used to help people cross or join the main traffic flow whether on foot, cycle or in a car. They work if everyone obeys the rules, but the outcome can be catastrophic if someone doesn't (with the risk being higher from drivers of motor vehicles).

There is more detail in the guidance (LTN 2/95), but essentially, where traffic speeds are lower (85th percentile being under 35mph), then the green man/ cycle can be set to come in quickly (although the 20 to 30 seconds advice is still too long, it can and should be quicker). With higher traffic speeds, then the crossing will need speed detection.

On a 30mph road, needing speed detection admits there is a speeding issue and so speeding is rewarded by the crossing controller ensuring that approach speeds aren't too high. Speed detection can actually help reduce the time for a green man/ cycle of course when approach speeds are low and it is safe to bring in the crossing stage nice an early. Speed detection used to comprise of loops cut into the road and physically connected to the crossing controller which is very costly, but the technology is now allowing wireless detection which is far cheaper.

If we have the crossing connected to an area traffic control system (such as SCOOT), then waiting times might be even worse because the green man/ cycle is only coming in when it's not going to affect journey reliability time for drivers which is being monitored across an area. Certainly, my regular toucan is connected to SCOOT which is part of the reason it takes ages to get a green.

If someone is going to using a signalised crossing on a busy road, then the stream of drivers is going to be stopped at some point anyway, so wouldn't it make sense for the crossings to actually change quickly? the flip side of them not changing quickly is partly drivers seeing a red signal but nobody crossing (making red light jumping tempting) and partly people crossing because they are fed up with waiting and possibly not finding a safe gap (especially with children and older people having trouble assessing traffic speed).

It's also about respecting those travelling under their own steam and realising that their effort is significant in comparison to those driving. It's about time we started getting our priorities right.

5 comments:

  1. In the guidance, tables 3, 5 and 7, period A is described as "vehicle running time" and is at least 20 seconds for a button-activated crossing. In your opinion, could this be interpreted as being the minimum time since the previous vehicle stop signal? Or is it the minimum time between a pedestrian pressing the button and the vehicle lights turning amber, no matter how long it has been since a pedestrian last used the crossing?

    ReplyDelete
    Replies
    1. IIRC this is about allowing vehicles to run a while to clear queues which would have built up before giving another green. I know of many locations where that is cranked right up to a minute or longer!

      Delete
  2. Locally the Pelicans (yes...) are set so that the first response to a pedestrian button press is fast (not sure but appears to be 10s maybe) but that a subsequent press won't get another green for a minimum of some longer time (again not sure, maybe 90-120s).

    Colin Smith

    ReplyDelete
  3. This is one of my bug-bears, too. New Puffin or Toucan crossings that are installed in my city have long wait times for the pedestrian/cyclist.

    There's a Toucan about 100m from a busy junction. After pushing the button, traffic is allowed to queue back from the main junction to the Toucan. Then, and only then, will the green man appear. That 100m stretch is being used as a traffic reservoir which presumably is released in tandem with both the Toucan and the busy junction. Thing is, it's a low speed, local road and traffic in the opposite direction is almost non-existent. Traffic is balked by the main junction, not the crossing.

    The result is that it is rarely used by cyclists (I do sometimes for a laugh) because it offers no advantage.

    On these types of crossings you see pedestrians looking puzzled, looking at the push button then up at the signal heads. "Why haven't the lights changed?" kind of look.

    ReplyDelete
    Replies
    1. That's probably having the crossing and junction linked which is arranged for journey time reliability for drivers rather than the convenience of people crossing.

      Delete